| Brand | RW Energy |
| Model NO. | Small-sized PLC |
| Rated voltage | 24V |
| Product edition code | 3E （Standard of Ethernet） |
| Series | XD |
XD series small-sized PLC fast speed, stableperformance and powerful function
In addition to all functions of standard PLC, it has faster processing speed (about 15 times that of XC series), larger internal resource space, two-axis linkage, interpolation and follow-up functions, and supports external SD card for data storage. Support the connection of right expansion module, expansion BD board and left expansion module.
Features and application
Network control
Ethernet series PLC isequipped with 2 Ethernetcommunication ports asstandard to easily build anintelligent network system.
2. High speed pulse output(With 2~10 axes positioning control function）
Up to 100KHz pulse output.
Pulse instruction is simple and powerful.
3. Multiple communication ports (Can realize rich communication functions)
XD series PLc has 5 communication ports at mostSupport RS232.RS485.bus communication(EtherCAT&CAN),Ethernet (only for Ethernet typePLC), can connect VFD, meter and other peripheraldevices,communication network can be set upfreely.
4. High speed operation (Fast data processing)
Non-Ethernet type PLC
The basicinstruction processing speed 0.02-0.05us,scanningtime 10000 steps 0.5ms, program capacity 256kB~512kB, andprocessing speed are about l2-15 times that of XC series.Ethernet type PLC
The basic instruction processing speed 0.01-0.03us,scanningtime 10000 steps 0.2ms, program capacity lMB~4MB, and processing speed are about 2-3 times that ofXDM series.
5. Bus control (High speed communication, cost saving)
The bus network can be easily constructed through standardEtherCAT bus and CAN bus, and multi-device control can berealized with minimal wiring.
XDH series PLC has EtherCAT motion control master stationfunction.
6. High speed signal acquisition(With 3-10 channels high speed counter)
By selecting different counters, it can count in singlepnase incrementalmode (tne max frequency can reach80kHz),AB phase mode (double frequency and quadruplefrequency are optional,and the max frequency can reach50KHz) and differential mode (the max frequency canreach 200kHz)
High speed control is realized by simple high-speedcounting instruction.
7. Strong expansion capability
XD series PLc basic units can be equipped with rich l/Oexpansion module, analog input and output module.temperature control module, BD board and leftexpansion module,which can easily realize analogcontrol for various purposes
The data exchange between the expansion module andthe ontology has changed from the original parallel porcommunication mode of XC series to the SPl serial portcommunication mode of XD series, so the data exchangespeed is faster than that of the original XC series (2ms/AD)
XD1 Economic type product Series
configuration：1. Program capacity 256KB 2.I/0 sequential control 3.Max 1/0 32 points 4.Basic instruction 0.02~0.05us 5.RS232,RS485 6.X-NET field bus
XD2 Basic type product Series
configuration：1. Program capacity 256KB 2. I/0 sequential control 3. Max l/0 60 points 4. Basic instruction 0.02-0.05us 5. RS232 RS485 6. X-NET feldbus 7. 2 channels 100KHz pulse output 8. 3 channels high speed counting(single phase max 80KHz, AB phase max 50KHz)
XD3 Standard type product Series
configuration：1. Program capacity256KB 2. I/0 sequential control 3. Max 1/0 380 points 4. Basic instruction0.02-0.05us 5. RS232 RS485 6. X-NET feldbus 7. 2-4 channels 100kHz pulse output(Y2, Y3 max pulse output frequengy ofXD3-24T4/32T4are 20KHz）8. 3 channels high speed counting (single phase max 80KHz, AB phase max 50KHz) 9. USB port high speed download (max 12Mbps)
XD5 Enhanced type product Series
configuration：1. Program capacity 512KB 2. I/0 sequential control 3. Max 1/0 592 points 4. Basic instruction 0.02~0.05us 3. RS232,RS485 4. X-NET field bus 5. 2~10 channels lOOKHz pulse output 6. 3~10 channels high speed counting (single phase max 80KHz, AB phase max SO KHz) 7. USB port high speed download (max 12Mbps)
XD5-xDnTm Differential type product Series
configuration： 1. Program capacity 512KB 2. I/0 sequential control 3. Max 1/0 560 points 4. Basic instruction 0.02~0.05us 5. RS232,RS485 6. X-NET field bus 7. 4 axes 920KHz differential pulse output 8. 4 channels 1MHz differential high speed counter 9. USB port high speed download (max 12Mbps)
XDM Motion control type product Series
configuration： 1. Program capacity 512KB~1.5MB 2. I/0 sequential control 3. Max 1/0 572 points 4. Basic instruction 0.02~O.OSus 5. RS232,RS485 6. X-NET field bus 7. 4~10 axes 100KHz pulse output 8. 4~10 channels high speed counter (single phase up to 80KHz, AB phase up to SO KHz) 9. Follow-up function 10. USB port high speed download (max 12Mbps) 11. Linear/arc interpolation
XD3E/XD5E/XDME Ethernet communication type product sequence
configuration：1. Program capacity 1MB 2. I/0 sequential control 3. Max I/0 572 points 4. Basic instruction 0.01~0.03us 5. RS232,RS485,RJ45 6. X-NET field bus 7. 4~10 axes 100KHz pulse output 8. 4~10 channels high speed counter (single phase up to 80KHz, AB phase up to 50 KHz) 9. Linear/arc interpolation 10. Follow-up function
XDH EtherCAT bus type product Series
configuration：1. Program capacity 2~4MB 2. Ethernet communication 3. Max 1/0 572 points 4. Basic instruction 0.01~0.05us 5. RS232,RS485,RJ45 6. X-NET field bus 7. 4 axes lOOKHz pulse output 8. 4 channels high speed counter (up to 200KHz) 9. 3-axis linear/arc interpolation 10. Follow-up function 11. EtherCAT communication 12. 16 channels electronic CAM (XDH-30A16L cannot support)
-
Ultimate Guide to AC Contactor Abnormal Noise: From Electromagnetic Noise to Mechanical Vibration, Accurate Diagnosis and HandlingIn electrical control systems, AC contactors are among the commonly used electrical components, and they are also a common source of various electrical faults. After long-term use—especially in harsh environments with high levels of dust—AC contactors may sometimes emit squeaking or rattling noises after being pulled in and held. The causes of this phenomenon are analyzed as follows.Squeaking Noise After Pull-In and HoldingA fully functional AC contactor makes no noise when energized and pulledFelix Spark09/11/2025 -
Mismatched AC Contactor Sizing? These 4 Typical Issues You Must Not Ignore – Click to View SolutionsAC contactors (with the electrical schematic code KM) are core electrical devices used to control the connection/disconnection between power supplies and loads in circuits, and they are also common equipment that electricians need to work with regularly. In practice, it is not uncommon to find that some peers make mistakes in selecting AC contactors, leading to improper sizing and subsequent persistent issues. Here, four of the most typical common mistakes are highlighted for reference.I. Over-RJames09/11/2025 -
Comprehensive Guide to High-Frequency Fault Handling of AC Contactors: 90% of Problems Solved with One Method1. Fault Phenomena, Cause Analysis and Handling MethodsContactor does not operate or operates abnormally after coil energization Open circuit in coil control circuit; Check if there is wire breakage or loosening at the terminal blocks. If there is a wire breakage, replace the corresponding wire; if there is loosening, fasten the corresponding terminal block. Coil damage; Measure the coil resistance with a multimeter. If the resistance is ∞, replace the coil. Thermal relay not reset after operatiFelix Spark09/11/2025 -
Proper Installation of AC Contactors | A Practical Guide to Avoid Burning and Misoperation, Master It in One ArticleAC contactors are widely used for switching and controlling power circuits. They use main contacts to open and close circuits, and auxiliary contacts to execute control commands. Main contacts typically only have normally open contacts, while auxiliary contacts often have two pairs of contacts with normally open and normally closed functions. Small-sized contactors are also frequently used as intermediate relays to work with main circuits, thereby achieving the function of remote control or contJames09/11/2025 -
Application and Maintenance of AC Contactors | Comprehensive Analysis of Common Fault Handling, Master It in One Article1 Analysis of Key Components of AC ContactorsAn AC contactor is an automated electromagnetic switch used for long-term, high-frequency switching of AC main circuits and control circuits. It features advantages such as automatic operation, under-voltage and no-voltage protection, high-capacity operation, strong stability, and low maintenance requirements. In the electrical control circuits of machine tools, AC contactors are mainly used to control electric motors and other loads.The key componentFelix Spark09/11/2025 -
Why Do Contactors Always Burn Out? Overload and Short-Circuit Protection Must Be Implemented SimultaneouslyContactors are used to close and open loads that require such operations during normal use, particularly for specific activities like medium-voltage public lighting and industrial electric motors.The medium-voltage contactor + fuse combination controller (F-C) can control motors up to 12 kV. However, medium-voltage controllers are also suitable as feeders for other types of loads, especially transformers. For such loads, contactors are usually modified to include mechanical latching, so that theEcho09/11/2025
-
Distribution automation systems solutionsWhat are the difficulties in overhead line operation and maintenance?Difficulty one:Overhead lines of distribution network have wide coverage,complicatedterrain,many radiation branches and distributed power supply,resultingin "many line faults and difficulty in fault troubleshooting".Difficulty Two:Manual troubleshooting is time-consuming and laborious.Meanwhile,therunning current,voltage and switching state of the line cannot be graspedin real time,because of the lack of intelligent technical mRW Energy04/22/2025 -
Interference Generated by Frequency Converters and SolutionsA frequency converter is a device used to adjust the speed and voltage of an electric motor by changing the motor's supply frequency to achieve speed control. However, during operation, frequency converters generate some interference that can negatively impact other electronic equipment and the power grid. Therefore, it's necessary to adopt solutions to mitigate this interference.Electromagnetic Interference (EMI): When adjusting the motor's supply frequency, frequency converters generate higRW Energy08/21/2025 -
Common Inverter Faults and SolutionsOvercurrent FaultOvercurrent is one of the most frequent faults encountered during inverter operation. To better protect the inverter, multi-level protection against overcurrent is generally implemented. Based on the severity of the overcurrent, it can be categorized into the following situations: power module overcurrent, hardware overcurrent, and software overcurrent. Typically, power module overcurrent is the highest-level fault. The hardware overcurrent threshold is significantly lower thanRW Energy08/21/2025
